home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
PROGRAMM
/
PROGEDIT
/
1356.ZIP
/
INSTALL.SE
< prev
next >
Wrap
Text File
|
1988-08-18
|
8KB
|
180 lines
╔═════════════════════════════════════════════╗
║░░░░░░░░░░░░░░░░░ ║
║░ █▀▀▀▀▀░ █▀▀▀▀▀░ - SE - ║
║░ █░░░░░░ █░░░░░░ ║
║░ ▀▀▀▀▀█░ █▀▀▀░░░ Softkey Editor Version 1.4 ║
║░░░░░░ █░ █░░░░░░Copyright Henry Weidman 1988║
║░ ▀▀▀▀▀▀░ ▀▀▀▀▀▀░ All Rights Reserved ║
║░░░░░░░░░░░░░░░░░ ║
╚═════════════════════════════════════════════╝
MONOCHROME DISPLAY PROBLEMS
If you are using a color display adapter with a monochrome
monitor, refer to the README file for setup instructions.
PRINTING SE.DOC
If your printer does not print the extended ascii character
set, refer to the README file for instructions on how to
print SE.DOC.
IMPORTANT
╔═════════════════════════╦══════════════════╦════════════════════════╗
║ ░░░░░░░░░░░░░░░░░░░░░░░ ║ USING SOFTKEYS ║ ░░░░░░░░░░░░░░░░░░░░░░ ║
╠═════════════════════════╩══════════════════╩════════════════════════╣
║ ║
║ Softkeys are the F1 to F10 or shift-F1 to shift-F10 function keys. ║
║ When a small up arrow is displayed on the screen in a softkey label,║
║ press the SHIFT key and the FUNCTION key simultaneously to activate ║
║ the function. For example: ║
║ ║
║ Softkey ║
║ Label ║
║ ╔═══════╗ ║
║ 1║ Menu ║ Press shift and F10 simultaneously to exit to the top ║
║ 0║ Next ║ level softkey menu. Press F10 to go to the next lower ║
║ ╚═══════╝ level softkey menu. ║
║ ║
║ Where possible, softkeys are displayed from left to right according ║
║ to frequency of use. The most frequently used keys are assigned to ║
║ F1 and the least frequently used keys are assigned to F9. ║
╚═════════════════════════════════════════════════════════════════════╝
INSERTING AND DELETING TEXT
The keypad "Ins" key toggles the INSert and OVeRtype modes and
displays the current mode on the status line. In insert mode,
characters may be inserted wherever the cursor is. In overtype
mode, a character typed at the keyboard replaces the current
character. The keypad "Del" key deletes the current character.
The backspace (<-) key deletes the previous character.
READING FILES
┌───────┐ The current file is abandoned and the user is
F│ Read │ prompted for a valid file name and the new file
1│ File │ is read into the editor.
└───────┘
┌───────┐
F│Insert │ The user is prompted for a file name and the file
7│ File │ is inserted into the current file following the
└───────┘ line that the cursor is on.
The file name can also be entered on the command line along
with a line number:
SE myfile.txt 210
╒══════════════╕
│≡≡ CAUTIONS ≡≡│
╘══════════════╛
╔═══════╗ ╔══════════════════╗
║ QUIT ║ ║ Quit? [Y,N,Q]: ║ 'Q' exits from SE without saving work.
║ ║ ╚══════════════════╝ 'Y' prompts the user to save work for
╚═══════╝ each window containing a file that
has been changed.
┌───────┐
│Abandon│ Clears the screen and text memory without saving work.
│ File │
└───────┘
┌───────┐
│Run DOS│ Non recoverable errors while running the DOS program
│Program│ will result in loss of the editing session. Save work
└───────┘ before using Run DOS.
┌───────┐ The current file is abandoned then the user is
│ Read │ is prompted for a valid file name and the new
│ File │ file is read into the editor.
└───────┘
EDITOR ON LINE HELP
Press the HELP softkey from the top level menu and then
select a help file from the HELP menu.
USING SEINSTAL
- Copy all of the files on the SE diskette to any directory
before using SEINSTAL.
- Select items from the pop up menus by using the up or down
arrow keys and then pressing the ENTER key.
- Change colors or ON/OFF choices by using the left and right
arrow keys.
- Exit by pressing the SPACE bar or the ESC key.
INSTALLATION OPTIONS
Install Directory
The directory where SE is installed. This is where SE
looks for macro files, special character files, help
files, and the macro editor.
Display Options
Select colors, monochrome mode or eliminate snow if
there is snow on your display when using the editor.
Prompt ON/OFF
If Prompt is ON the editor prompts before performing any
file operations.
Memory Requirement
How much memory SE uses. Determines the maximum size of
files that can be edited: 250K: 40 PAGES 512K: 115 PAGES
640K: 135+ pages.
Startup Macro
This is a macro file that is executed automatically when
SE is started.
- SE Version 1.4 Software License -
Softkey Editor is copyrighted by the author. If you obtained this
program from a shareware distributor or a bulletin board you may
use it to determine if it meets your text editing needs. If you
continue to use it, you must become a registered user. Version 1.4
of SE may be copied and shared with other users as long as the
entire diskette is copied. You are encouraged to share this software
with other users. SE version 2.0 or greater, which is available only
to registered users may not be distributed or copied except for
making a backup copy.
Registered users will receive:
1) Question and answer support via U.S. mail or CompuServe.
2) Version 2.1+ of SE which has the following additional
features:
- Interface to Turbo C and Turbo Pascal MAKE utility
- Macro Editor
- Repeat macros from 1 to 9999 times
- Paragraph formatting
- Column Addition
- 144 user definable special character keys
- User programmable file filters with 4 file filters
included. The file filters perform conversion of
documents from non ascii formats to ascii.
3) Notice of future updates to SE.
To become a registered user, use the order form in the readme file
and submit $20.00 for each system that SE will be installed on.
Site licenses are available on request.